kysledneck
New member
Hello! I want to upgrade this summer again, Could some one tell me what drivers would be the BEST for this sled? 9" 8" I see it has just 2 under there can I get 4 of them on! fully clipped 1" Camo track. also want to change any bearings down there& the jack shaft one also. Any info on this would realy help me! Thank you! Dan
Attachments
grapeape
New member
Cut off your outer drivers (wheels) and replace them with srx outer drivers. I say cut them off, as you would only need to press the new outers on from each side, rather than press them all off and start with a clean shaft.
kysledneck
New member
So the middle ones are fine no upgraded drivers worth the trouble? Thank you!grapeape said:
yamaholic22
Active member
outter drivers will probably be fine in place of those idlers. If you really wanted to eliminate ratcheting with a very loose track you could always go with extroverts.
richierich
New member
i have used outers and new bearing when you decide you ready to swap.also have the tracks.