Bike drags about to begin...I can't wait!

valin

Active member
Joined
Apr 7, 2004
Messages
2,075
Age
47
Location
Val Caron, Ontario
Should be around 6.2 in the 1/8th this year as it sits, and I'm thinking about hitting the bottle this season. :nos:
 

Attachments

  • Races 033b.jpg
    Races 033b.jpg
    260.7 KB · Views: 15

Yep, I have been there the last 2 years Derek. I was 3rd last year in North Bay. It's fun running against the stretched Busa's and running 1/2 second quicker. I just like lowering my time, I'm not all that concerned with running consistant. I've done a bit of work on the bike, and should be down to about 6.2 seconds this year in the 1/8th. I haven't run 1/4 mile yet, but am going to head to Earlton for sure. I would really like to know what i'd run. I'm hoping to run mid 9's.
 
OK, here goes...


-Akrapovic header with custom midpipe
-High mount carbon fiber MIG slipon
-Ivan's jet kit, modified airbox, K&N, Graves adjustable timing advancer
-Hyperpro steering dampner with gold top mounts
-Goodrich stainless steel braided brake lines (front and back)
-EBC HH racing pads up front
-Yamaha solo seat cowl
-Dussault Undertail kit
-MD Wright signal light integrator into tail lights
-Libertek adjustable flasher relay
-Polished mirror block off plates
-3" Bar end mirror
-Top Blocks footpegs
-Polished custom bar ends
-Polished top clamp
-Polished swingarm with polished 6" extentions
-Chrome chainguard
-Chrome rear master cylinder
-Chrome kickstand
-Anodized shifter rod and oil cap
-Stealth 45T sprocket, Vortex 48T sprocket, 16T front, and stock sprockets
-DID gold chain - super long (built out of two chains)
-Dunlop D208's
-Mickey Thompson MCR2 drag tire on spare rim

24,000 km on the bike.
 


Back
Top