Bike drags about to begin...I can't wait!
- Thread starter valin
- Start date
deekersrx700
New member
valin
Active member
Yep, I have been there the last 2 years Derek. I was 3rd last year in North Bay. It's fun running against the stretched Busa's and running 1/2 second quicker. I just like lowering my time, I'm not all that concerned with running consistant. I've done a bit of work on the bike, and should be down to about 6.2 seconds this year in the 1/8th. I haven't run 1/4 mile yet, but am going to head to Earlton for sure. I would really like to know what i'd run. I'm hoping to run mid 9's.
kyle3201
New member
we just got one of our new screamin eagle destroyers in. Looks like fun!
valin
Active member
The bike is now for sale. There is $20,000 invested into this bike. I'm selling for $9000 Cdn.
cacsrx1
New member
What kind of goodies U got in it???
valin
Active member
OK, here goes...
-Akrapovic header with custom midpipe
-High mount carbon fiber MIG slipon
-Ivan's jet kit, modified airbox, K&N, Graves adjustable timing advancer
-Hyperpro steering dampner with gold top mounts
-Goodrich stainless steel braided brake lines (front and back)
-EBC HH racing pads up front
-Yamaha solo seat cowl
-Dussault Undertail kit
-MD Wright signal light integrator into tail lights
-Libertek adjustable flasher relay
-Polished mirror block off plates
-3" Bar end mirror
-Top Blocks footpegs
-Polished custom bar ends
-Polished top clamp
-Polished swingarm with polished 6" extentions
-Chrome chainguard
-Chrome rear master cylinder
-Chrome kickstand
-Anodized shifter rod and oil cap
-Stealth 45T sprocket, Vortex 48T sprocket, 16T front, and stock sprockets
-DID gold chain - super long (built out of two chains)
-Dunlop D208's
-Mickey Thompson MCR2 drag tire on spare rim
24,000 km on the bike.
-Akrapovic header with custom midpipe
-High mount carbon fiber MIG slipon
-Ivan's jet kit, modified airbox, K&N, Graves adjustable timing advancer
-Hyperpro steering dampner with gold top mounts
-Goodrich stainless steel braided brake lines (front and back)
-EBC HH racing pads up front
-Yamaha solo seat cowl
-Dussault Undertail kit
-MD Wright signal light integrator into tail lights
-Libertek adjustable flasher relay
-Polished mirror block off plates
-3" Bar end mirror
-Top Blocks footpegs
-Polished custom bar ends
-Polished top clamp
-Polished swingarm with polished 6" extentions
-Chrome chainguard
-Chrome rear master cylinder
-Chrome kickstand
-Anodized shifter rod and oil cap
-Stealth 45T sprocket, Vortex 48T sprocket, 16T front, and stock sprockets
-DID gold chain - super long (built out of two chains)
-Dunlop D208's
-Mickey Thompson MCR2 drag tire on spare rim
24,000 km on the bike.
cacsrx1
New member
Nice
Valin do you have any results yet?