Expert susp?

I put one on a Viper I had a couple of years ago and loved it. Rode great in the bumps and weight transfer is unbelievable. I tried my hardest to beak the thing and it just begged for more!!!!

Tom
 
Struggled with setup on my RX-1 at 1st, but once it was dialed in it was great.

Gotta love that transfer!!
 
I have one in my 01 srx and i loved it. Im taking it out and going to try it in the SX we have, I think that sled would be better suited for it and easier to pound then the srx.

The srx is just to nice for me to beat to hell....
 
aSRX600guy said:
love my expert equiped SRX. had to crank the front preload, the bumper was shearing off moguls
Click to expand...

If that's the case , I would switch the top mounting brackets for the front ohlins from side to side. Someone mentioned that on here once and w/ a little grinding they will switch easily and it should raise the front about an inch. I'm not looking to run snow cross just a better ride when you hit rough trails and of course good transfer for lakes. Still in thought though, need more feedback :dunno:
 
Expert X

The Expert skid was probably the best money I ever spent on my SRX, and I,ve spent alot. Its easy to dial down the transfer to rail around the corners, but its SO much fun to turn it to full transfer and ride around with your skis in the air. It may not have quite the ride of the M-10, but the ride is 10 times better than the stock proaction. I'd say go for it, you won't be dissappointed.
 

Attachments

  • wheelie.jpg
    wheelie.jpg
    32 KB · Views: 16
I have the extensions on my ohlins, the front end was still pretty bad riding compared to the rear. Good thing with the expert is you just nail it and skip right over everything.
 

Attachments

  • 100-0078_IMG_2.jpg
    100-0078_IMG_2.jpg
    100.2 KB · Views: 3
You must log in or register to reply here.


Back
Top