A new Prototype Sled

[BenderSRX]

Hi Guys i found this on snowmobile fanatics. Takes a peek it looks cool. Its called the Wolverine

http://www.skoterportalen.com/news/nyprototypsnowolverine.htm

 

[TopGunnSrx]

Hmm definatly is using some Yami parts on it though

 

[Yamahammer485]

Can anyone else see a phazer under all that stuff, like the tall tunnel and funny bulkhead? Different spindles so im not sure...

I was thinking along the lines of a body kit for the phazer, but maybe not....

 

[redsnake3]

i can only say one thing...

SWEEEETTTTT.

any word on the powerplant?

 

[PowerValve-700]

I like it, except for the nose and ski tips. Steering and seat looks adjustable. Now lets see what it looks like in blue:

 

[TopGunnSrx]

I like it, except for the nose and ski tips. Steering and seat looks adjustable. Now lets see what it looks like in blue:

Now that is sweet

I'd ride it but maybe if it had an expert x type skid, still the same poopy no action

 

[PowerValve-700]

I know, it has the older aluminum saddle type skis too.

 

[shortstop20]

Now that is sweet

I'd ride it but maybe if it had an expert x type skid, still the same poopy no action

You got that right.

 

[aSRX600guy]

its not a real sled. looks like some design class project. notice the lack of controles on the handlebars, lack of istrumentation, and lack of steering rods. its just a pretty mock up with a proaction skid and RX1 spindles. the body is a bit of a phazer rip off.

 

[Heimdall]

its not a real sled. looks like some design class project. notice the lack of controles on the handlebars, lack of istrumentation, and lack of steering rods. its just a pretty mock up with a proaction skid and RX1 spindles. the body is a bit of a phazer rip off.

The sled in the pictures are a full scale prototype. It looks pretty nice, just need some smaller ski tips.
Luckily it doesn't look anything like the first pictures we got of it:

 

[aSRX600guy]

if its a prototype its only half built. thats a design mockup at best, nothing more. not only are there no controles outside the haldebars that aren't comected to the skis, the headlights are stickers, and theres no place to put the gas.

the most amazing thing if this is a new low volume sled, why use the worst skid in the industry?

maybe they chose the right name, because I think it'll be a bit of a stinker.

 

[Sled Dog]

Most definitly has the old Yamaha ski's on it with different loops.

 

[Blue_Blooded]

http://www.skoterportalen.com/news/nybestallsnowolverine.htm

 

[bennyj]

They have a webpage up and running now:

http://www.wolverine.se/

 

[BenderSRX]

Looks like they will be for sale this season, 2 models a 2 stroke 600 with 105hp and a 4 stroke with 120 hp and looks like it will weigh in the same as the Phaser

 

[yamaholic22]

In one of the pictures on the site the sled has yamaha clutches on it. Seems like they just took a lot of yamaha parts and slapped them together to make a sled, clutches, suspension, skis, a arms, phazer rear styling, etc

 

[YAMADOG]

Looks like it suffer's from zacirey disease.....looks zacirey like my ---hole after a night of hard drinking.......fubar for sure.....

 

[Blue by U]

I think yamadog hit the nail on the head that is one ugly POS ski-doo,yamaha
rip-off

 

[auji700triple]

meh, It looks like it would Fall apartin seconds of use. All that plastic dont look too promising on a sled like that. What if it gets really cold, the plastic would crumble into a million of pieaces..LOL! hahahaha

 

[welterracer]

Looks half phazer (the back half) and the front is definitly Nytro