mayquad
New member
- Joined
- Aug 16, 2006
- Messages
- 3
I have a 1200XL ltd. The sponson tore off the side, bolts and all.
I drilled thru the outer hull and welded hex head bolts to the metal plate and re fiberglassed. It lasted about a week and tore off again. Any help
I drilled thru the outer hull and welded hex head bolts to the metal plate and re fiberglassed. It lasted about a week and tore off again. Any help
TimeBomb
New member
hmmm, tough one. try looking on rivaforums.com, alot of guys on there that know alot about waverunners. its a forum like ty but just for pwcs.
redsnake3
New member
only thing i could think it would be would be if they were not adjusted the same and one was taking too much pressure.
mayquad
New member
- Joined
- Aug 16, 2006
- Messages
- 3
thanks red & TB
I'll check the placement and see what's up at riva.
I'll check the placement and see what's up at riva.
The best forum on the web for personal watercraft is www.pwctoday.com
Go under the Yamaha section and post your question. You definitely need to reinforce the hull before remounting.
Go under the Yamaha section and post your question. You definitely need to reinforce the hull before remounting.