camoplast predator

[ExpertXViper]

Take pics from the back and side and post it.

 

[modsrx]

track

picture of it

 

[2001SRX=Fast]

i would say that is a 1 1/4

 

[modsrx]

well i will go for 1 inch track i think cause everyone now beat me at top end lolll

 

[yamaholic22]

He is right its a 1" to 1 1/4" track, different lug heights, its the connected cone predator, really a good all around track. Put a 136 version on my buddies piped sx 700 and that thing really goes in the loose stuff. Will lose a little top end though, the lugs aren't open at all for free-flowing so it acts like a big fan. The hacksaw and 9830 predator are both awesome 1" tracks with good top end.

 

[yamyrider]

Same track I have. That is the Preditor cone

 

[modsrx]

did u lost some top end with that kind of track

 

[2ooosrx]

You are going to lose a lot of top speed with this track because is a connected track meaning that it is basically a big fan where wind resistance will take place slowing you down subtantially.

 

[modsrx]

thnx for the help from all of u

 

[Yamablue]

I've had that track for a couple years. I love it, and yes I did loose a little top end. Probably around 5 or 6 mph on my Rx-1, then I put it on my viper and now that it has pipes and ported cyls, i run about the same MPH but way quicker gettting there. I was rubbing on the protectors and I relieved the track to not, but I think at top speed it still rubs. I also have 192 studs and plastic backers, so that adds a little weight.