aaen performance pipe for phazer?

mountainmaxrider

New member
Joined
Mar 9, 2006
Messages
110
Age
36
Location
makkovik, Labrador
hey guys

i have a aaen performance pipe for a 94-95 v-max 600 and i was wondering how would i make this pipe fit on a 99-01 phazer 500? in the picture show below if the bender phazer pipe. the one i have for a v-max 600 is the same shape as this pipe but the only thing different is the exhaust exit. on the v-max pipe i have, the exhaust exits out the end of the pipe and on he phazer pipe in the picture below has the exhaust exit about 1/2 feet from the end of the pipe. i was just wondering if you can tell me how can i make my v-max pipe into the phazer pipe? there are two pictures below showing you the difference beween the to pipes.the first one is the phazer pipe and the second one is the v-max pipe is just a drawn up picture. please help me!!
 

Attachments

You know that both of those pipes, the one for the vmax and phazer are from the old pogo (TSS) front ended sleds right, not like your pro-action sled.

These will nto fit and it is so much easier to just go ahead and buy the pipe that fits the sled. Trying to remember here, but if it says Bender makes the pipe for the 500 (99-current, in canada), and the old one, but it only gives you the picture of the old style pipe, which looks like what you have. The pipe for your phazer is there, but the picture isnt there. Iv seen the actual pipe for your sled in person, and it fits perfectly.

Welding exhausts is super tedious and annoying, and sometimes the welds fail, well at least my freinds welds did, hahhaa

Go with either the proper listed pipe either AAEN or Bender for your 99-new phazer.

BTW, if you guys are wondering why I say till current for the phazers, are that in canada they still sell the Venture XL which has that same motor.
 


Back
Top