How do you remove a rivet from a clutch weight without damaging the weight? I "know that you use a center punch and drill in the middle"? But, still, how do you remove the core without grinding????
A K MtnViper
New member
After it is drilled it is weak enough that with a straight edge screw driver and or a flat punch and some light tapping it breaks apart.
yamaholic22
Active member
or just grind the head off and pound the body of it through with a center punch, either way works
That's what I'm trying to avoid, grinding. I have a tendency to clutter it up completly.
Venom
Member
I drilled the head off and used a center punch to push it through.
Cheers.
Cheers.