terret725
New member
whats the best trail and or 800 foot drag clutch and gearing set up for a sxr700 with pi center dumps. i ahve stock gearin right now but was planing on droping a tooth on top. i already have the gear.
terret725
New member
ttt...
89L weights with about a 52/44 helix & about 4.5 gram rivet. Been a while so i might be slightly off on the rivet size. I know this is real close. You want 7900 rpm holeshot climbing slowly to 8100 rpm.
8ca Weights Work Well Too With A 56/44
And You Might Want To Gear It Up, The Pipes Only Spin At 8100 Rpm.
Lower Than The Stock Rpm.
And You Might Want To Gear It Up, The Pipes Only Spin At 8100 Rpm.
Lower Than The Stock Rpm.
terret725
New member
im not lookin for top speed trails are tighta round here i want quickness. i realy would rather drop a tooth.