cos in alaska
New member
Looking to put a more aggressive track under a 1994 Viking. It seems to me the Kimpex 20x156x1.2" would work without any mods. Has anyone put a 1.25 Camoplast under this machine? This would open up a lot of options. Like the new Ice Claw!!!
Thanks
Thanks
SID
New member
max track
I had a 1.25 X 20 X 156 KIMPEX on a 1992 VK a little touchey when you try to put in all together used old HYFAX to fill the rubber knobs in on the track so it can slip sideways an Murffey's SOAP for the lub to help if you need more info let me know it was a great sled I did up grade the skies to USI tunnel wides it sure improved every thing the USI are 7 " wide good luck SID
I had a 1.25 X 20 X 156 KIMPEX on a 1992 VK a little touchey when you try to put in all together used old HYFAX to fill the rubber knobs in on the track so it can slip sideways an Murffey's SOAP for the lub to help if you need more info let me know it was a great sled I did up grade the skies to USI tunnel wides it sure improved every thing the USI are 7 " wide good luck SID

cos in alaska
New member
SID,
Was the Kimpex an Aggressor 1.20"? Not sure what exactly what you did to get that track in. Yes, your right on the skis. I put all plastic A/Cat Mnt. skis on last year what a difference! No more sore shoulders. PM me your number and I'll give you a call. Thanks!
Was the Kimpex an Aggressor 1.20"? Not sure what exactly what you did to get that track in. Yes, your right on the skis. I put all plastic A/Cat Mnt. skis on last year what a difference! No more sore shoulders. PM me your number and I'll give you a call. Thanks!
SID
New member
track
as there is not very much room in front of drive wheels an you have to but the jack shaft in an move it to the transmation side after you have the track in an all the knobs on the inside of track want to stop you from doing it, what I did was fill the spaces of the track with old hyfax [cut to about 19 inchs long] held in place with rubber bands this helped ,to make it a some what smooth, an spray liquid soap as a lube, so you can move the jack shaft to line every thing up will send you a PM with more info SID
as there is not very much room in front of drive wheels an you have to but the jack shaft in an move it to the transmation side after you have the track in an all the knobs on the inside of track want to stop you from doing it, what I did was fill the spaces of the track with old hyfax [cut to about 19 inchs long] held in place with rubber bands this helped ,to make it a some what smooth, an spray liquid soap as a lube, so you can move the jack shaft to line every thing up will send you a PM with more info SID
