136 Ext.

[Mark / C&C PowerSports]

Just wondering if anyone has done this to a 2000 SXR style sled. I would like to see what they look like, and what you changed for gearing and clutching. This sled will be used on the trails as well as off the trails. Thanks

 

[EricMichael]

well most ext kits come with tunnel extention,rail ext. hose's and covers and new cross over tube.On models with rear exchangers you will need to remove it and use the cross over tube. maybe go with 8cr weights, 21/40 gearing.go here and its a few pics of your style sled with the 136 http://www.totallyamaha.net/forums/showthread.php?t=27423&highlight=136+ext

 

[Yammerhead]

Here are some pics from when I went 136 on my 97 700SX. Used a stock tunnel extension and a 2" track. I am still playing with gearing but I went to 8 tooth drivers for track clearance so it is quite a bit different than the stock ratio.

Stretched 97 700SX

 

[Ding]

The Webmaster (Tom) has one that is really sweet. At least he still had it the last I knew.

Should be pics in the photo section.

 

[jds2500]

here is a 2001 136" SXR. It was the best thing I could have done to the sled. Still has the stock clutch and gearing. With the stock clutch and gearing it will do about 102 mph with a 275# rider on it. In deep powder I was keeping up with a 800 Summit.

 

[Ding]

See Tom's sled here . . .
http://www.totallyamaha.com/Mr_Sled/index.html

 

[Mark / C&C PowerSports]

skid

i was also wondering if a stock yamaha 136" skid could be bolted in place without any major mods...