Cut washers on stock transfer rods?

[Venom]

Hi all,
I was thinking of getting transfer rods for my but they're really expensive (over $200 Cdn with tax).

Can I just cut the existing washers on the stock transfer rods on my Venom? If so, how much should I cut off and from which washer, top or bottom or both?

I want better hook up and still keep the skis on the ground.

Cheers.

 

[ReaperSRX]

You could just switch the one's you have now. Put the top one on the bottom...etc. I did that the first year i had my SRX, poor man's transfer kit. Work good for better traction out of the hole but i did have to pull up the limiters a bit to get better bite in the corners. But you should get a set of adj rods, post on here and should be able to get some at a good price or check out Royal Distributing online they have a cheap set for like $90 CND.....James

 

[chilli]

I just bought a pair from Royal Distributing......these were for the SRX though, not sure if they apply to your sled.

 

[fourbarrel]

If your handy with tools at all there's a link in the tech section to make the stock ones into adjustable transfer rods.You need a welder,thread taps and some other small gear to accomplish this.Otherwise post in the classifieds and see if someone has a set for sale.

 

[Concept Carbon]

royal distributing $89can and they worked great on my sx

 

[Venom]

OK thanks. I'll have to checkout royal distributing. My Yamaha dealer told me they can get me a set for $179 (Cdn) + tax (15%).

Cheers.

 

[reddog mmax 700]

pm box

your pm box is full, i have a set that i will sell cheep and i'm just across the water from you so shipping wouldn't be much...lol

 

[Venom]

your pm box is full, i have a set that i will sell cheep and i'm just across the water from you so shipping wouldn't be much...lol

just emptied my PM box. Please send me details.

Cheers.