
bluemonster1
LIFE MEMBER ONLY ONCE!!!
I am using a new Ultimax 3 belt ,8DN-20 weights with .85g inner hole and 2.7 g outer holes with stock primary spring with 4 engagement washers.Secondary has the Dalton 51/43 Helix wrapped at 80 with the green spring.Just waiting for my 5.6mm rollers for my primary with these weights. But sled pulls out of the hole at 8100 and really pulls nicely to 8500 WOT.The new rollers will help raise my engagement rpm and holeshot rpm ,so that will be good.Question is wrapping my secondary to say 70 ,is this going to do anything other keep less pressure on the belt.It will help in backshift most probably.Trick is to not get belt slipping..right.What have you guys basically used on your wrap and what have you found that works best.Just a general question.Every sled is different I know.