Well, the sled is almost done now. Windshield will be cut lower. Otherwise it´s pretty much there.
This was the starting point: 978 km´s on it...
Ski´s are made from ´96 XT´s ski´s. Bottom of the ski´s are taken off, frame of the ski´s drilled with over 50 holes to cut weight. And new 10 inch wide ski skins are replacing the old steel bottom. Those should help with the flotation. In the pics other ski is still without the blue paint.
Track is new camo free ride 9034C 14"x136"
Samueljackson also added a homemade mountainstrap.
Engine top was rebuild, fresh pistons, rings and top bearings. Just incase ( long storage time ). Head was cut to ´93 SX specs. Also new SX gasgets are in use now.
Pics:


video : View My Video
Ike
This was the starting point: 978 km´s on it...


Ski´s are made from ´96 XT´s ski´s. Bottom of the ski´s are taken off, frame of the ski´s drilled with over 50 holes to cut weight. And new 10 inch wide ski skins are replacing the old steel bottom. Those should help with the flotation. In the pics other ski is still without the blue paint.
Track is new camo free ride 9034C 14"x136"
Samueljackson also added a homemade mountainstrap.
Engine top was rebuild, fresh pistons, rings and top bearings. Just incase ( long storage time ). Head was cut to ´93 SX specs. Also new SX gasgets are in use now.
Pics:


video : View My Video
Ike
Last edited: