Concept Carbon
New member
Ok I just bought a used rear heat exchanger with protectors from ebay for $25, but the previous holes for the protectors are garbage and elongated, not centered, the protecters were even crooked, we had a good laugh at work about it, the rivets they used were like 1inch long.
Well im going to be tig welding the protectors directly to the heat echanger, and just need to know the center to center measurement from protector to protector. (outside of one to the inside of the other)
I would measure it myself but just sold my track and my sleds not here.
Im gettiing a 1" 9830
My guess the measurement will be 9"
thanks Jay
Well im going to be tig welding the protectors directly to the heat echanger, and just need to know the center to center measurement from protector to protector. (outside of one to the inside of the other)
I would measure it myself but just sold my track and my sleds not here.
Im gettiing a 1" 9830
My guess the measurement will be 9"
thanks Jay
Last edited:
Concept Carbon
New member
help i need to know by tomorrow morning.
richierich
New member
9" center to center