Wrong primary cover bushing?

fourbarrel

VIP Lifetime Member
Joined
May 5, 2003
Messages
2,767
Location
St George,New Brunswick,Canada
I just picked up a bushing for the primary cover on my 98 SRX from a dealer($45 fuc#'in dollars Canadian) and I'm pretty sure I've got the wrong one.The parts clerk,who does know his stuff,check the computer for the correct #'s and even went so far as to check other sleds such as Vipers and tripple V Max's and they all come back to the same number.The problem is that the bushing I have in the package is narrower than the one in my clutch cover now.It would seem that the one I just bought is for a twin,shallow cover,and the bag it's in is mismarked or someone put the wrong bushing in this package.
I measured mine to be about 1 & 3/13 inches if I remember right and the one I just bought is only about 11/16.Can I run this bushing in my clutch cover or what?I scratched mine pretty bad when I had it apart last spring and dont know if it will last so I'd like to replace it.
If not does someone have the proper bushing,new,they want to sell?
 
Man what a huge brain cramp I must have has the other day when I measured that bushing :oops: .Turns out I had the right one as I just finished putting it in.I dont know where my mind was ;):D .Still pisses me off that it cost $45 for that little SOB.
 


Back
Top