clutch rollers worn

..SNAKEBIT..

..SNAKEBIT..

VIP Member
Joined
May 2, 2003
Messages
1,055
Location
NE IOWA
ok my rollers are pretty loose on the mounting tube
looks like the bushings are worn, how loose can they be?
Running a 02 CPR piped viper
8dn-10's for flat land
8ek's for the mountains
should I replace them with the stock 14.5mm roller?
or buy 15, 15.6 or something else?
any good used ones out there?????????
 
bushings

check your sheave bushing and cover bushing if them are worn that can cause yor rollers to take a crap
 
ok Ryan how much is to much been a while sence I had a new one?
so should I just order all the new clutch bushings (secondary also)
and new 14.5 rollers right from Yamaha or ???
 
There's your rollers.You have to dissasemble the primary clutch it's threaded together.I don't know if you ever done one but they do make rebuild kits that include the slider in the tower to .The dealer should be able to do it in under and hr unless you know someone near you that has the tool.
 
You must log in or register to reply here.


Back
Top