grooter
New member
is 96 studs ok or do i need to go more. and what pattern seems to work best
SRXtrafast said:You will be disappointed w/96 which would be alright on a Phazer[1984-1998]. I would recommend 144 because too many times I've heard of under studding and wish they'd gone more. Your viper is 119hp. stock and if work the throttle at all you will take the chance of bending or breaking some studs not to mention stress the track and rip it. I've seen where a ripped track w/the stud still intact put a hole in the front heat exchanger[94 v-max 600 w/96 studs]. It's not that much more money and WELL worth it.![]()
SRXtrafast said:You will be disappointed w/96 which would be alright on a Phazer[1984-1998]. I would recommend 144 because too many times I've heard of under studding and wish they'd gone more. Your viper is 119hp. stock and if work the throttle at all you will take the chance of bending or breaking some studs not to mention stress the track and rip it. I've seen where a ripped track w/the stud still intact put a hole in the front heat exchanger[94 v-max 600 w/96 studs]. It's not that much more money and WELL worth it.![]()