1980 enticer graphics
- Thread starter jkenosh
- Start date
I've also got a 250 enticer, 1980 short track and yes your graphics are wrong, the rainbow is also across the sides of the hood, it does not say enticer on the hood where yours does, but it looks like a nice sled..I'm currently trying to put grip warmers on ours, have them working but had to wire the hot side into the rear light which dimms it but the warmers work..Could not figure out the assessory wire on the darn thing
looks like your missing the 'handle' on the front that is just below the aluminun guard that wraps around the hood....you'll find these old sleds are nice on the trail but a bummer in the deep stuff...truely excellent ice fishing sleds also...there is a sight called 'daves vintage snowmobile' on the net, deals with older sleds as well as newer ones and he has over 5000 photos...look up your yamaha on it {brochures} and go to photo 5899 for a better picture of the stock condition...Mine is all stock except the handwarmers and the large windshield I made for it to cut back the cold...At my age the wife and I and the son like going in and while everone is goin vertical around us we just sit on the sled drinking coffee and enjoying the show 
SRXfromHELL
New member
Graphics
they look like custom graphic to me , I would guess they used late 80's early 90's exciter graphics for the font . Looks good , I had mine done twice the original size and deleted the white stripes
they look like custom graphic to me , I would guess they used late 80's early 90's exciter graphics for the font . Looks good , I had mine done twice the original size and deleted the white stripes
tomorrow I'll try to remember to take a picture of mine for you, try the site at daves vintage snowmobiles where I was able to get the actual photos of mine, and what we have are the same thing..Could sure use the wiring diagram if and when you get a chance to scan it, send it to my e-mail if thats easier for you..Also looking for a wiring diagram for a 87 ski doo citation (250)...They had the grip warmers hooked to the low beam side of the headlight...for now here is a partial photo I had on hand
