looking for recommended jetting for this sled, stock, 3500-5000'. any info?
nightmanx1
New member
what carbs are on it
seca
New member
the sx came with 38mm flatslides.
yes they are flat slides. anyone have any info on this sled?
nightmanx1
New member
what is the stock jetting for sea leavel and i should be able to figure it from there. Well get you in the ball park.
147.5 JN 2nd (4000-6000') down to zero
150.0 JN 2nd (2000-4000') down to zero
150.0 JN 2nd (2000-4000') down to zero
seca
New member
155 MAINS were stock. i have a shop manuel somewhere.
vmax-540
Member
The stock jetting is as follows. mains 155s
needle jet 9EL02- 3
pilots 55
screws 1 1/2 turns out
needle jet 9EL02- 3
pilots 55
screws 1 1/2 turns out
thanks. i will open the carbs up and see where i'm at.
nightmanx1
New member
I would start with 150, that would put tou right in the 3500 - 6000 feet area. I am going by the Mikuni pocket tuner.
these old eyes are getting weak. best i could make out was 55 on the pilots, 43.8 on the mains. saw no 1 in front of the 43.8, even with the one eye in the magnifying glass. confused!