Viper Skis on old VMax
- Thread starter Viper_Guy
- Start date
blkmax600
New member
looks good
Dave_Vmax600
New member
heres mine on my max
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
srv540
Member
hey me to...way better over the stockers!
Looks good I did that to my dads old sled last year.It was a huge improvment in handling
silversnow
New member
Dave_vmax600 ,
It looks like you have a big space like the ski could rattle side to side. Is this how it is or just the pic?
silver
It looks like you have a big space like the ski could rattle side to side. Is this how it is or just the pic?
silver
Dave I put shims in so the ski can't slid in the saddle.I put the on the out side so it actaully gives you a wider stance.
Dave_Vmax600
New member
yeah i was just to lazy to shim it lol.....i will this weekend.
it doesnt rattle as much as you think...thats why i wasn't quick to shimming it
it doesnt rattle as much as you think...thats why i wasn't quick to shimming it
Last edited:
viperking
Active member
looks good guys
cougar1985
New member
dave are those the ats skis from royal?put them on my vmax and what a diff.
Dave_Vmax600
New member
nope they are yamaha skis
How did you guys do that? Did you modify the stock saddles that fit the ski originally? Or did you have to fabricate a whole new saddle?
I'd really like to add plastic skis to my Exciter, was thinking about some new USI's, but if I can do it for alot less, that'd be nice.
Got any close up pics of the saddles, before/after and what mods were made?
I'd really like to add plastic skis to my Exciter, was thinking about some new USI's, but if I can do it for alot less, that'd be nice.
Got any close up pics of the saddles, before/after and what mods were made?
Dave_Vmax600
New member
i can get you all the specs this weekend im heading up north....ill get you all the measurements i did to make them fit.
plus ill take pics
plus ill take pics
braindead1684
Member
Doo Skis'
I got a set off a 2002 ski-doo mxz 600 sport, and All you have to do to get them to fit is remove the Large spacer that is used with the steel ski's and grind an oval on the one saddle so a bolt will clear, They ride A LOT better. There is 1 shim on each side. We fille the back of the saddle where it was open with some Silicon calk to adjust the amount the ski's can tip down as well and got it very close to stock and the silicon has held up to 220 miles so far. Heres some pics.
I got a set off a 2002 ski-doo mxz 600 sport, and All you have to do to get them to fit is remove the Large spacer that is used with the steel ski's and grind an oval on the one saddle so a bolt will clear, They ride A LOT better. There is 1 shim on each side. We fille the back of the saddle where it was open with some Silicon calk to adjust the amount the ski's can tip down as well and got it very close to stock and the silicon has held up to 220 miles so far. Heres some pics.
