bluemonster1
LIFE MEMBER ONLY ONCE!!!
There was power at the CDI box,but nothing at first connector.So did what anyone would do at this point(Took a gun and ,......)just kidding of course.Got some wire and spliced it in the y/b wire at the cdi box and spliced it in the y/b wire at the connector of the Tach.What do you know.The friggin Tach is working now.Somewhere between these 2 spots power is not running.Will solder the wire up and re-route it and tape it up for now.Now I can see what rpm's I am running with the clutching.
2001SRX=Fast
New member
Good to hear. Blue any drags out your way?
bluemonster1
LIFE MEMBER ONLY ONCE!!!
No drags I am aware of.But anytime you are on the Red River towards ST Adolphe,you can find some Ski-doos to drag.To many yellows sleds out my way.Only seen an SRX about a month ago.Ski-doo and Artic Cat territory.We need to get a bunch of Yami's out here to show them whose boss...eh!
bluemonster1
LIFE MEMBER ONLY ONCE!!!
Well one issue is done and now will put on my adjustable transfer rods next.Also will replace all 3 exhaust donuts because they are not very tight anymore.Then will concentrate on PV's and final suspension set up.Hope I can get out to ride soon.
2001SRX=Fast
New member
if your donuts arnt tight i am sure thats your springs.
Hay bluemonster there is a poker durby tomorrow at Dominion City. Only about a half hour ride from St.Adolphe. It starts there and goes to Letellier, Morris, St.Malo, Ridgeville, and back to Dominion City. Should be a lot of fun. The weather is supposed to be nice. No Yamaha's out here either, Be nice to see some.
bluemonster1
LIFE MEMBER ONLY ONCE!!!
Really,haven't been to one in over 20 years.Got my SRX running pretty good now,I wonder if I should chance it.
I had the same thing happened on my old improve stock srx