Got That Friggin Sob Tach Working Finally

bluemonster1

bluemonster1

LIFE MEMBER ONLY ONCE!!!
Joined
Dec 30, 2005
Messages
12,690
Age
69
Location
Howden ,Manitoba,Canada
There was power at the CDI box,but nothing at first connector.So did what anyone would do at this point(Took a gun and ,......)just kidding of course.Got some wire and spliced it in the y/b wire at the cdi box and spliced it in the y/b wire at the connector of the Tach.What do you know.The friggin Tach is working now.Somewhere between these 2 spots power is not running.Will solder the wire up and re-route it and tape it up for now.Now I can see what rpm's I am running with the clutching.
 
No drags I am aware of.But anytime you are on the Red River towards ST Adolphe,you can find some Ski-doos to drag.To many yellows sleds out my way.Only seen an SRX about a month ago.Ski-doo and Artic Cat territory.We need to get a bunch of Yami's out here to show them whose boss...eh!
 
Well one issue is done and now will put on my adjustable transfer rods next.Also will replace all 3 exhaust donuts because they are not very tight anymore.Then will concentrate on PV's and final suspension set up.Hope I can get out to ride soon.
 
Hay bluemonster there is a poker durby tomorrow at Dominion City. Only about a half hour ride from St.Adolphe. It starts there and goes to Letellier, Morris, St.Malo, Ridgeville, and back to Dominion City. Should be a lot of fun. The weather is supposed to be nice. No Yamaha's out here either, Be nice to see some.
 
You must log in or register to reply here.


Back
Top