SLP triples and 1 layer removed from the head gasket. Max power with the SLP's is 8800. I was running 8cr's and 14.5 rollers with a Bender blue spring, and a Roller Rooster secondary, but my rollers went out and on the way home it ate 2 of the 8cr's. so... starting from scratch... should I stick with the 8cr's or do you guys have a better setup?? I can't remember what the rivets in the primary were but they were from SLP's clutching chart. 13.3 tip and 11.3 heel? I think? also I am running 1.25" predator with no studs. thanks
I have a set of 8dn-00's and 15.5 rollers from an SRX, would it even be worth the effort to try these??? If not what other weights should I look for?? the 8cr's seem pretty hard to come by.
The 8cr,s work well. i ran em with good results in my piped 700
I have a set here at home that look just about identical to those in the picture. I could send them to you and you could have 8 bad weights.