700 SXr clutching

[BBlueSRX]

SLP triples and 1 layer removed from the head gasket. Max power with the SLP's is 8800. I was running 8cr's and 14.5 rollers with a Bender blue spring, and a Roller Rooster secondary, but my rollers went out and on the way home it ate 2 of the 8cr's. so... starting from scratch... should I stick with the 8cr's or do you guys have a better setup?? I can't remember what the rivets in the primary were but they were from SLP's clutching chart. 13.3 tip and 11.3 heel? I think? also I am running 1.25" predator with no studs. thanks

 

[BBlueSRX]

I have a set of 8dn-00's and 15.5 rollers from an SRX, would it even be worth the effort to try these??? If not what other weights should I look for?? the 8cr's seem pretty hard to come by.

 

[Turk]

The 8cr,s work well. i ran em with good results in my piped 700

 

[BBlueSRX]

found another set of 8cr's in the garage last night but they have chatter marks in them. any way of sanding these baby's back into shape? I have 1 good weight and 5 F'ed up ones

 

[Mysledblows]

I have a set here at home that look just about identical to those in the picture. I could send them to you and you could have 8 bad weights.