Hi guys!
It seems like it`s over for now. It has been raining heavily for two weeks and the temperature has been up to 12+.
Last year we took our last trip on the 18th of April, so this is disappointing.
We basically just joked about going riding because of the lack of snow, but we figured it was worth a try.
This morning I put new mains in my Viper, from 155 to 156.3 which is stock.
The previous owner said he had jetted it for his elevation (1000m asl) so I just wanted to check what jets he put in and go back to stock jets.
pulled carbs
These holes were taped off, I removed the tape.. .
Here`s a tip, remove the top of the airbox and the dividers so that you can reach the rubber from the inside of the airbox, makes it much easier to install.
Then put on the tractor.. .
It seems like it`s over for now. It has been raining heavily for two weeks and the temperature has been up to 12+.
Last year we took our last trip on the 18th of April, so this is disappointing.
We basically just joked about going riding because of the lack of snow, but we figured it was worth a try.
This morning I put new mains in my Viper, from 155 to 156.3 which is stock.
The previous owner said he had jetted it for his elevation (1000m asl) so I just wanted to check what jets he put in and go back to stock jets.

pulled carbs


These holes were taped off, I removed the tape.. .

Here`s a tip, remove the top of the airbox and the dividers so that you can reach the rubber from the inside of the airbox, makes it much easier to install.

Then put on the tractor.. .