damaged primary

[venture700]

I just tryed to remove my clutch and my visegrips slipped and chipped a peice of metal about 1 square cm on the top of the clutch. will this viborate to hard or be to dangerious to operate at all???

 

[Turk]

If you could post a picture of the damage it would help a lot.

 

[mountainmaxrider]

hey

heres the pictures of the damaged primary clutch!

 

[shortstop20]

That's not good, looks like it's cracked all the way to the bolt hole. My gut says don't run it, but someone else will know for sure.

 

[Srxspec]

I'd look for either a used primary clutch to replace that one or buy a new moveable sheave and get it changed. The moveable sheave part number is 8BV-17620-11-00 and cost is around $130.

 

[redsnake3]

do not run that clutch unless you have a serious death wish.

 

[Turk]

moveable shive is toast. I got one looks exactly the same,

 

[mountainmaxrider]

anyone know where my buddy can get a used one in good shape? he only needs the moveable shive!

 

[venture700]

ok if i got a new "movable shive" would i be able to replece it by myself with no special tools and presses?

 

[Turk]

You need the yamaha grunt tool or home made equivelant. There is loc tite on the threads plus it has opposite threads; turn right to loosen. I have seen many destroyed spiders from do it your self guys trying to take apart their primaries.

 

[jminor1]

what is the tool worth from yammie?

 

[redsnake3]

cnd it is atleast 2-300 from yamaha.

 

[Srxspec]

Part numbers for the clutch break down tools are YS-28890-B and YS-34480.