Hi Guys,
We are now a sponsor of Totally Yamaha, so I thought I would make an introduction. We specialize in making billet wheels, and other billet accessories for snowmobiles.
We can make the wheels any size that you need (stock & custom sizes up to 9 inch), and we currently have 4 designs available. We also offer billet wheels with replaceable rubber. To compliment our wheels be sure to check out our 'Nasty Nuts'. We also have billet pull cord handles, and choke lever's ready to order. Before the snow flies we will also be offering billet gas caps, and some other new products. All of our billet products can also be powder coated in any of the 14 colors we currently have available.
Please feel free to PM me or email me (info@tricked-toys.com) with any questions, and be sure to check out our website at www.tricked-toys.com to see pictures of all our products.
thanks
Brian
We are now a sponsor of Totally Yamaha, so I thought I would make an introduction. We specialize in making billet wheels, and other billet accessories for snowmobiles.
We can make the wheels any size that you need (stock & custom sizes up to 9 inch), and we currently have 4 designs available. We also offer billet wheels with replaceable rubber. To compliment our wheels be sure to check out our 'Nasty Nuts'. We also have billet pull cord handles, and choke lever's ready to order. Before the snow flies we will also be offering billet gas caps, and some other new products. All of our billet products can also be powder coated in any of the 14 colors we currently have available.
Please feel free to PM me or email me (info@tricked-toys.com) with any questions, and be sure to check out our website at www.tricked-toys.com to see pictures of all our products.
thanks
Brian
Allvipedup
New member
I am diggin those red wheels! Very nice!!!
tippmannator
New member
nice stuff! that link went in my favorites!!
its gonna be nice in our salt road lollll
modsrx said:
We can put a clear powder coating on the wheels that will prevent them from tarnishing.....The ones that I ran on my sled last winter had no coating on them and they still look great....just give them a quick wipe a couple of times throughout the winter.
I might have to get some of these for me New Nytro. Are they direct bolt ons?
MrSled said:
Yes, they will be direct bolt on if you stick with the stock sizes.
bluewho
Active member
I like the choke lever it looks like a clutch wieght.
2001SRX=Fast
New member
what is needed for oversized rear wheels.? On a 2001 srx.
will those chock levers fit on an 98 srx 700.
viperking
Active member
can you make a choke lever for an 02 viper
2001SRX=Fast said:
If you want to add larger rear wheels you will need an offset axle....we currently do not make these, but there are a bunch of places that do.
If you want the look of the larger wheel, just going with a stock size billet will make the wheels look much bigger.
viperking said:
That would depend on how close they are to the REV choke lever's....if they are close than we probably can.
amatosrx said:
I am not sure, they were made to fit a REV, and I also know that they were very close to some of the cats as well....the part that matters is the size of the hole where the pin goes, and the size of the inside part....if it is close to what your machine has then we can probably make it work.
the chock levers are very close in shape. please check if you can make some.
amatosrx said:
We would need to see one first and I don't know anyone that has one of these machines. Our local Yamaha dealer went out of business in the spring as well....
You want to send us yours??
i can send you one in the mail.
amatosrx said:
Yes, they will work on the yamaha axle...we just need to know your current bolt lengths, and thread type.
amatosrx said:
That would be great
Tricked-Toys
1245 Maple Hill Court
Unit #2
Newmarket, ON
L3Y 9E8