I decided that I need to replace my upper large 7" idler wheels on my Viper while I am replacing the upper control rod bushings. I am not seeing many options for replacements. The only wheels I have found that are close are some that are in the JR Graham catalog that are 7.125" in diameter. Are these going to rub on anything? Thanks, G.B.
valin
Active member
No. You will be fine. They won't even come close to anything.
richierich
New member
i have 2 brand new Yamaha ones.$20 each or $47 shipped for pair.these are 7" wide with a 6205 bearing.let me know if your are same and if you want.thanks
richierich said:
Rich,
Yes, that sounds like what I need. Can you replace the bearing in the wheels you have? Thanks, G.B.
richierich
New member
yes on these they are replaceable.unlike the stock viper ones.just want to make sure your bearing is same #.they were either a 6205 or 6004 or 6204.
richierich said:
I will take two 7" wheels with the 6205 bearings if you have them. Are these on your web site? How can I buy them from you? Thanks! G.B.
richierich
New member
they arent on my site.but you can paypal me direct or call with c/c #.if you want to double check that yours have the 6205 bearing.thanks
sales@richmotorsports.com = my paypal
920-582-4823
sales@richmotorsports.com = my paypal
920-582-4823
Thanks Rich!
G.B.
G.B.
richierich
New member
no...thank you 
Hey Rich,
I received the wheels today and they are just what I needed. Thanks again for the great service and price on these parts. G.B.
I received the wheels today and they are just what I needed. Thanks again for the great service and price on these parts. G.B.
richierich
New member
great......thanks for needing some wheels