Clutch Puller

J

jrmboat

New member
Joined
Nov 23, 2006
Messages
32
Age
68
Location
New Jersey
Do you need a clutch puller to remove the primary clutch on a 1997 VMax? If so, can I use a regular gear puller or is it a special type of puller? Can you describe to me what it looks like and how it works?
Thanks.
 
Do Not Use A Gear Puller You Will Damage The Clutch Sheaves! Unfortunately You Need The Puller In The Picture Above.
 
Like the other guys say, do not use a gear puller.
Removing a primary can be hard enough even with the correct puller.
So, get a puller like that!. Let me know if you get in trouble.. .
 
Thanks for the info on the puller. At the end of last season it wasn't downshifting until I would come almost to a complete stop so it's probably a good time to go through both clutches. What parts should I expect to replace? The sled has 4000 miles on it and I don't think its had any clutch work done before.
 
check your secondary on the one - visually make sure the clutch is working right.

jrmboat said:
Thanks for the info on the puller. At the end of last season it wasn't downshifting until I would come almost to a complete stop so it's probably a good time to go through both clutches. What parts should I expect to replace? The sled has 4000 miles on it and I don't think its had any clutch work done before.
Click to expand...
 
You must log in or register to reply here.


Back
Top