Can anyone tell me the spec and the proper procedure for adjusting my throttle cable. Also, is there a particular order for adjusting, meaning the throttle, idle, choke, oil pump and choke?
daman
New member
Do these checks in this order;
1st- set idle to 16- 1,7000 rpm's(@ operating temp)
2nd- set throttle end play to 2mm(adjustment for that is here )
3rd- set oil pump cable free play here and here to 20(richer)to 22(leaner)mm
then set choke anytime to 1.5mm
1st- set idle to 16- 1,7000 rpm's(@ operating temp)
2nd- set throttle end play to 2mm(adjustment for that is here )
3rd- set oil pump cable free play here and here to 20(richer)to 22(leaner)mm
then set choke anytime to 1.5mm
Last edited:
daman
New member
no problem, try a search, lots of info here. 
