mopar1rules
Active member
what angle is this helix?
Part# 6ms7 (its on a 98 xtc 600)
Part# 6ms7 (its on a 98 xtc 600)
your stock spec. is for 47 degree....ty home tech. pages for clutches....CP
mopar1rules
Active member
yeah, but I don't think this helix is stock. when the sled was purchased like 6 years ago, the previous owner thought that there was some clutch kit on it. I found out that the weights and springs were changed, and now it has me thinking if the helix if even stock
its more than likely a maxximum performance helix. probably will never find the angle, I don't think they released the angles. I also have a maxx performance helix 7ms7 od something like that never found the angle. wish I could be more helpful
Shawn
Shawn
jwiedmayer
New member
Yep its a max helix. I had that kit on my 600sx and it was a pretty nice improvement
terret725
New member
pop the bushing out of the center some times its under the bushing on max helixs i think.
mopar1rules
Active member
ok thanks.
mopar1rules
Active member
hey jwiedmayer, you wouldn't happen to know the angle of this helix (6ms7) though off head?
mopar1rules
Active member
does anyone have any notes as to what helix angle this is? i still don't know and really want to know now. i tried the measuring way and keep getting different measurements, so I just want someone to let me know what they actually are.
yamaholic22
Active member
PM Mrviper and ask him. I know he measured a lot of helix angles with a CAD setup and took notes. He might've did that one.
it's a 48-42
700triple
Member
I also have a Maxx Perf helix on the last sx I brought and dont know what is the angle. Number is 7PT7. Anyone can help me?