93 Exciter ST 1.25 RIpsaW?

[John11-87]

hi a was wondering if anybody knows if a 1.25 ripsaw track will go on my 93 exciter ST please let me know thanks

 

[John11-87]

Without switching my drivers i mean....

 

[nightmanx1]

I have a 1.25 on mine with 9 tooth drives, it is a b@tch to get it in but you should have 1/2 in clearance at the front heat exchanger when all done.

 

[tedgoesfast]

my 1993 sx i put a 1 inch track with 1.25 studs and it clears fine the sx does not have a front heat exchanger

 

[Exciter89]

curious does the SX use anything in place of the heat exchanger? IE an additional on elsewhere? or a surge tank or something? i'd like to ditch the front exchanger on my 89 if possible. BTW I have a 1" with 1.25 studs and it clears the front heat exhanger with about 3/4" to spare... but i also have 8 tooth wahl bros drivers

 

[seca]

????

thats odd, the sx i had did have a front heat exchanger.

 

[ace16a]

Without checking, I pretty sure mine has the front exchanger too.

 

[Exciter89]

anyways i didnt have a problem using the above with a front heat exchanger. i have front heat exchanger protectors too just as a little added percaution