The Pro Stock 700 Viper is Done

J

jtssrx

I like DirkDiggler
Joined
Apr 26, 2005
Messages
188
Age
52
Location
New Baltimore
I deleted the Other two threads. Here are the Completed photos. I spent 3 hours finishing it up tonight.

We are headed north for the weekend to test.

List of people to thank

Allen Ulmer "For selling me this sled. Allen also did a awesome job building this sled. He also installed my Water temp and Proline and did a awesome job"

Don Pizor AKA Mr Viper "For talking me into this sled" I was looking at another sled and he pointed me at thins sled.

Bruce at Cb Performance " Your Front end is very trick. thank you for getting it to me in a timely fashion" I'm Looking forward to installing the Belt drive and testing that for you as well.

Curt at CCperformance "your Coatings are always the best"

Joe Haack " he will be the pilot of this sled at future races" Until i lose 40 pounds LOL


In the Future I will be adding 44mm Lectrons and Possibly getting Mr Viper Case Porting.

I plan on running this sled at Muscle Sled Mania and the World Series on Ice in Gaylord Michigan. I should have no problem meeting the 625 pound limit.
 

Attachments

  • IMG_2828 (Medium).JPG
    IMG_2828 (Medium).JPG
    78.1 KB · Views: 99
  • IMG_2823 (Medium).JPG
    IMG_2823 (Medium).JPG
    84.8 KB · Views: 49
  • IMG_2824 (Medium).JPG
    IMG_2824 (Medium).JPG
    78.8 KB · Views: 50
  • IMG_2825 (Medium).JPG
    IMG_2825 (Medium).JPG
    77 KB · Views: 63
  • IMG_2826 (Medium).JPG
    IMG_2826 (Medium).JPG
    96.4 KB · Views: 61
Last edited:
extremeviper said:
what kind of pipes are those?
Click to expand...

They are Hand Built 10000 rpm race pipes. Darcy Rosentrotter built them for Allen. He also did the Porting and Head design of the motor.


At 750 pounds this sled ran 5.3 in 500 feet. I only have to be 625 to run pro stock. With the Proline and the reduction of weight I hope to run in 5.9's in 660. That would challenge last years winner of the World Series


Thanks for all the Compliments Guys. Allen did a nice job Lightening up this sled and installing the Pro line for me. I did all the cleanup to make her shine.
 
horkn said:
that weight is including driver I am assuming. hence why you have a lightweight raceday pilot:)
Click to expand...


Yes it is the sled weigh 440 ready with fuel ready to race. It was 449 when i got ti from Allen But I added a Light weight front end. I'm Also going to but a shell gas tank with a Fuel cell in it to reduce weigh as well as Gutting the seat. That should drop close to 20 pounds off it.
 
ExpertXViper said:
Where the sound clip man????? You know everyone wants to hear that thing scream!!!!
Click to expand...


I will Try to take a Vid today when I get it running to put it on the trailer.
 
jtssrx said:
I plan on running this sled at Muscle Sled Mania and the World Series on Ice in Gaylord Michigan. I should have no problem meeting the 625 pound limit.
Click to expand...

I should be at that event and look forward to watching it run.

BTW: Very nice sled!
 
vmax4rules said:
I should be at that event and look forward to watching it run.

BTW: Very nice sled!
Click to expand...


I just found out today I have to build a Tunnel enclosure if i want to Run it in the Prostock class. Yuk
 
that reminds me, I never did collect my sales commission check from Allen..............LOL! :rofl:

Nice job Jason, just a quaker oats/tucan sam seat and its all ready! :2strokes:

I will be at the world series, call me when you get a chance. talk to ya soon! :wel:
 
You must log in or register to reply here.


Back
Top