Air screw setting

S

SED

New member
Joined
Mar 12, 2004
Messages
40
Where do i set the air screw at on a SRX 700.....98-99 and the 2000-2002
 
Alittle info

Some guys here describes parts on a carb/circuit different then others...can you post a pic of a carb & the item your are describing...if its the one under the carb, thats a fuel screw its tunable...if its the one inside the fuel bowl, thats a pilot jet & main jet( not settable only changeable buy replacing with different sizes & the needles...if its the ones in the front of a carb its the air horn, thats a air screw, not settable only changeable with different sizes...then theres a fuel float with a needle & seat, that needs adjusting...so there is a lot of stuff in them carbs...
Have you looked here in the tech section on t.Y.!!!
http://www.totallyamaha.com/snowmobiles/AAATuning Chart/Specs.htm
http://www.totallyamaha.com/snowmobiles/aaTECH/carbs/cleaning_carbs.htm
http://www.totallyamaha.com/snowmobiles/aaTECH/carbs/Carbs.htm
http://www.totallyamaha.net/forums/showthread.php?t=43118
Post back how ya did...cheers
 
Last edited:
My mistake..its the fuel screw..the one under the carb in the front...You know the ones you cant get to without pulling the carbs unless you have remote adjusters...lol
 
Yep, did that a few time this on mine & a few other sleds as well, you should be able to get the specs on your sled in one of my links I sent ya...good luck, what you do is screw them in till lightly seated & then screw out the # of turns specified for your sled, I would set it 1/8 turn more then factory & should work fine...cheers
 
Not much to add, theblues got it coverd like a blanket..lol

do put your location and sled/year in your profile..
 
You must log in or register to reply here.


Back
Top