Clutch problem

[01sxr700]

I have a 01sxr700 as my handle implies and have put a 144" track with clutching by TURK. That is Advantage edge 50/44 helix, new green spring, stock weights with 4.5 gram rivets in the inner and outer holes with the WWW spring. Last year it ran fine, this year when I go to take off the belt just gets pulled down into the secondary. It works not bad when it's cold but as soon as the clutches get a little warm I can hardly move the sled. Have a new belt on .
Anybody got any suggestions?

Thanks

 

[JohnnyQuest]

Check your spring wrap on your secondary or you secondary spring for breakage. I'm guessing that with that helix and spring the wrap should be between 60-80 degrees

 

[01sxr700]

new spring at 70 deg.

 

[rick8637]

i would deglaze the belt and sand out the secondary clutch facings with some 220 grit , you are getting slippage. Its either that or the spring is the culprit.