Scooter6901
New member
Does anyone know what the factory sag is for this unit ?
SWEDE
New member
They really don't go off of sag like most sleds, its all about the control rod gap.Adjust the skidframe to get 50/50 control rod gap with you seated on the sled, this can most likely be accomplished with adjustments to your full range adjuster.
Scooter6901
New member
Thanks Swede.
I just dialed the front shocks down, dialed the center shock up, adjusted the fra to the stiffest setting. Off to see how she rides tomorrow.
If there is more gap on the top of the control rod .... what does that do. I was trying to get more traction as the track was spinning all over the place, I only have about 3 mm left on the limiter straps so I decided to play with the other stuff.
I just dialed the front shocks down, dialed the center shock up, adjusted the fra to the stiffest setting. Off to see how she rides tomorrow.
If there is more gap on the top of the control rod .... what does that do. I was trying to get more traction as the track was spinning all over the place, I only have about 3 mm left on the limiter straps so I decided to play with the other stuff.
Scooter6901
New member
Noticed that even after the adjustments I had all of the gap at the bottom when sitting on the sled.
Looked at the rear shock and it was at the lowest setting. Moved it to the highest setting and now I get about 40 top gap to 60 bottom gap when seated. Is there a way to get more or do I need a new spring.
Looked at the rear shock and it was at the lowest setting. Moved it to the highest setting and now I get about 40 top gap to 60 bottom gap when seated. Is there a way to get more or do I need a new spring.