SolidWorksTTM
New member
Does anyone have a Bender single pipe installed. What are your impressions? I already have the Bender silencer with heelclickers installed. Have not changed the Helix (not sure what to go with) any suggestions? How much jetting change with this pipe will I need?
2002viperer
New member
id go with the bender triples they sound good and theres more H.P.
03viperguy
Moderator
timebomb had one, not sure if he still does or not.
TimeBomb
New member
still have the bender single and silencer. as far as hp goes, there isn't much of a gain. sled looses about 14lbs. i didn't touch the jetting but i'm now thinking i should have. runs a little lean at an idle but i've had the pipe/silencer combo on for about 5,000 miles now and haven't had any problems. if you decide to do it, your viper will get louder! alot louder as the can burns out. mine screams now, but i don't mind. i also have heel clickers and i didn't mess with the helix. if i messed with the clutching more i could probably get more out of the pipe and silencer combo. hope this helps
MtnMax600
New member
I have the 4x4 pipe and can. I left the jetting alone. It might run a bit on the lean side but not so bad I have had a problem or worried about it. Its definitely louder than stock but not obnoxiously loud. Definitely nowhere near as loud as triples.
ExpertXViper
New member
I also have one installed on my Viper, I cant claim any HP gain or and thing of that matter but with it match to a MBRP Trail can is sure does sound nice. Its more of a weight saver mod than a HP mod IMO.
03viperguy
Moderator
soundclips? I thought someone had one? maybe....
S.S.Viper
New member
Hey there...
Go to the link below...I purchased his setup after he did the comparison for everyone to see..Unfortunetly I haven't installed yet...Gotta get my HC's tuned to stock first and also gunna powder coat the pipes...I'll let ya know the results when I get em dialed in...
http://www.youtube.com/watch?v=yZYsoeAU2D8
Mtn-Track was the one that caught my on on powder coating them...look up his post..he has good input...as for the person who did the Youtub post above...gosh..can't think off the top of my head..but a steller dude who not only sold me his setup..but posted the link for all to see...
cheers
YOP
Go to the link below...I purchased his setup after he did the comparison for everyone to see..Unfortunetly I haven't installed yet...Gotta get my HC's tuned to stock first and also gunna powder coat the pipes...I'll let ya know the results when I get em dialed in...
http://www.youtube.com/watch?v=yZYsoeAU2D8
Mtn-Track was the one that caught my on on powder coating them...look up his post..he has good input...as for the person who did the Youtub post above...gosh..can't think off the top of my head..but a steller dude who not only sold me his setup..but posted the link for all to see...
cheers
YOP
Last edited:
ViperXC
New member
Wow, That sounds nice.