700 jetting

[srxeater]

i just converted my 600 triple to a 700 and and i am going to run the 600 carbs for a couple of weeks until i get my 33's. what base line jetting should i start with on the 31's so i dont burn it down right away? as of right now i'm running 147.5 mains and 45 pilots(from the 600), and i have a set of 157.5's sitting here as well. i want to keep it on the fat side for break in.

 

[srxeater]

with all the mods listed in my sig minus the head gasket mod.

 

[srxeater]

well i put the 157.5 mains in and the 45 pilots with the fuel screws out 2.5 turns for the inital fire up, pretty dang fat. what my main question is should i be jetting leaner/richer/ or the same as if i had the tm33's on there? thanks in advance-

 

[700triple]

I think with the 33's you should run no more than 152.5 with the open element air filters. I was running 148.6 and 52.5 in my 98 700sx with the PSI triple pipes. With my other 700 '00 I run it with 145 main and the stock 47.5 pilot and it ran fine always with a set of PSI triples. I think your fuel screw should be no more than 2.25 turns out.

 

[srxeater]

im getting closer, 150 mains, 45 pilots, screws 2 turns out still have to work on midrange.

 

[srxeater]

got to put about 20 miles on last night and checked the plugs at idle mid and wot. and the pistons are still shiny here is a crappy pic of the plugs, it took a dozen pics and this is the best one i could get. and keep snowing!