Clutch setup for Srx 440

henke

henke

New member
Joined
Dec 30, 2007
Messages
17
Age
52
Location
Sweden
I have rebuild a Srx 440 -78 (8H1) . The engine is stock with stock pipes.Ratio is 1.94.The clutch is brand new 102c.I am now driving N1 and purple 207758 but i dont thinks that is the right. Its start at only 4900 rpm, but run good on the top 10100rpm.Can some one give me some help?
 
They look same but have anther partnr. 8H1-14610-00 and 8H1-14620-00



The skis are wrong (-76) and the track
 
ouh, Can i come and visit in your garage :) That is one beautiful sled. I hope mine are like that after... time.
 
Last edited:
GET THIS SPRING FOR PRIMARY YELLOW- GREEN , COMET PART # 208228A !! should get ya to 5500. AWSOME SLED BY THE WAY. 3:16 (yammie tony)
 
Wow thats nice i happen to have a 1977 and to my knowledge they didn't have that tunnel in 1978. Anyway i run a blue spring and Qs in a 102 comet.
 
spring chart?

YAMMIEGOD3:16 said:
GET THIS SPRING FOR PRIMARY YELLOW- GREEN , COMET PART # 208228A !! should get ya to 5500. AWSOME SLED BY THE WAY. 3:16 (yammie tony)
Click to expand...

Im new to this so here goes...is there a chart for the springs on comet 102c

The spring on mine loks to be a green spring, with a yellow paint stiped section?
 
edgeracer1 said:
Wow thats nice i happen to have a 1977 and to my knowledge they didn't have that tunnel in 1978. Anyway i run a blue spring and Qs in a 102 comet.
Click to expand...

Maybe you need to spred your knowledge about SRX440 Yamaha's :)

These are Scandinavian versions of -77 racer... (-78 8H1)
 
yes, that sled sure looks like a 77 srx to me. it has the 77 tunnel, hood, decals, rear sway bar, pipes/canister and belly pan.
 
Last edited:
Guys, See SRX models topic so you know the differences of 8F2 -77 and 8H1 78 !
 
Last edited:
You must log in or register to reply here.


Back
Top