kirkrx1
New member
im reading about these m10 swaps and im wondering about doing it to my wifes sled can someone tell me what year of m10 there using and what there going for price wise and do they bolt right in or is there any fab work invovled thanks
xsivhp
Active member
Get a 2001 or newer M10 and an install kit from fast - are you looking at the tech pages? Detailed install in a viper out there. <link here>
xsivhp
xsivhp
Hatch
New member
Look out for people telling you the polaris m-10 is the same as the fast m-10 cause its not. I have a 06' or 07' polaris m-10 128" I just installed in my 02 viper and it involved some machining work and different rear arm location than the Fast m-10. Tubes are different sizes and lengths. I did buy the fast mounting kit, but had to do some modifiyin to get it to work. The polaris m-10 is a very cushy suspension though. Prices vary $500 and up. If you want less work find a fast m-10 and buy there mounting kit. Good luck.
pipdviper
Member
You can tell the FAST unit from the Polaris one by looking at the front arm assembly. The FAST unit is made from square box tubing on both front and back arms. The Polaris units front arm is made from round tubing instead of square. To tell the 2001 and newer skid is to look at the aluminum mounting bracket on the front arm. The older (metric) one is flat on the top and bottom. The newer mount is flat on the bottom and has a hump on the top.