clutch/belt height

[smokin george]

I have a 97 V-Max 600 XTC and was wondering about the belt ride height on the primary and secondary clutches. On the primary it goes to about 3/4 of an inch from the top and on the secondary the belt is about an 1/8 of an inch below the top. The sled has almost 12,000kms on it and I don"t think the clutches have been done to my knowledge. I"m curious about the belt heights and as far as rebuilding what clutch kit to buy?

thanks! smokin

 

[daman]

On that sled with a new or in spec belt you should be flush to 2mm bellow
the edge of the secondary.

 

[Yama49601]

There are several setups on here for that. One uses 8AB weights and one uses 8CA weights. I think the recommended helix is a 50/44.