Ripsaw track on Sxr

[snocrosser]

Will a inch and a quarter ripsaw track work on a sxr as far as enough clearence in the tunnel. I don't plan on studding it. Thanks

 

[blueblooded]

yep,my buddy has a 1.25 ice ripper track in his sxr 700.

 

[Mysledblows]

With out studs no problem. If you pull the protecters you can run up to a 1.75" with the stock 9 tooth drivers.

 

[snocrosser]

Good deal! Port Yamaha has great deals on Ripsaws right now thats why I asked. Thanks Guys.

 

[extreme4max4rules]

10/4 on the 1and 1/4 my buddys got one on the sxr 700 allso

 

[yamahauler4]

One of the best things I did on mine was put a 1.25 ripsaw. Took out tunnel and frt exch protectors, plenty of clearance, no issues. Not sure about 1.75 though... I think I heard that 1.5 total is absolute max to be safe.

 

[jds2500]

I had put a 1.5" ripsaw on my 01 sxr. I had to remove the front exchangers but I did not plan on studding it. It was the best thing I did to the sled, in 10" - 12" of powder it was keeping up with a 800 Summit.