rlbock
Member
Does anyone know if the new plastic glues will repair a break in a hood?
Does anyone else have any idea's to repair besides buying used/new?
Appreciate any feedback
Does anyone else have any idea's to repair besides buying used/new?
Appreciate any feedback
mulderdad
New member
How bad is the break?
I have a good used one for sale in classified section.
Rick.
I have a good used one for sale in classified section.
Rick.
bluewho
Active member
Panel bond is the product bodyshops use.
Danger Dog
Member
SEM makes a plastic repair material.
I've used a product (can't remember the brand name) which was basically called "corvette bumper repair". It was a two part epoxy. It's a flexible epoxy.
I fixed a Polaris hood by drilling the end of the crack them drilling a series of holes on either side of the crack then sewing the crack closed with fiberglass thread. I then roughed up the surounding area, applied the epoxy, sanded and painted. Held up very well.
I fixed a Polaris hood by drilling the end of the crack them drilling a series of holes on either side of the crack then sewing the crack closed with fiberglass thread. I then roughed up the surounding area, applied the epoxy, sanded and painted. Held up very well.