best electrical men

modsrx

Active member
Joined
Oct 15, 2006
Messages
3,447
Age
50
Location
canada,qc
who is the best electrical men out here i got a good question for him :-)) :dunno:
 
well i wanna know witch wired to take to feed the cluster of a viper in a srx body... they have a fused on viper and don't have in a srx but both wired goes to load control relay can i run a wired from there put a fused and run it to the cluster
 
srxspec or betheviper would be my suggestions. they have both done what you are trying to do. Maxdlx
 
Having a strong electronics background I could answer, but would simply be reading the schematic to do so. I do not have the wiring or logic schematics for inside the CDI itself. I will wait to see what others who may have this info or actual testing results have to say.

Can you elaborate on what you are trying to accomplish?
 
Last edited:
just try to find where to take power to feed the cluster ..cluster is for a viper but in a srx sled ... well they have all the wiring in the shop manuel on the site but just wanna make sure ....i just need a second advise
 
all other signal seem to come from ground from different item ..tach,gaz guage ect
 
thnx i found out ...sometime i overlook and ask stupid question lolll
 
Last edited:


Back
Top