cadmo
New member
Ill be putting on a powermadd pivot raiser and 6" raiser with mx bars on the viper, will mountain cable's be long enough?
assuming the mx bars are relatively straight, with some rerouting of the cables, you should be alright. assuming you are refering to a mountain viper for the install, the bars are around 6" tall anyways, with about 25 degrees of sweep back. if you are doing this to a short track viper, a longer brake line will be needed.
cadmo
New member
no its on a short track and the bars are factory suzuki so there pretty straight with no raise, i was wondering to get the mtn cables or if any one makes longer aftermarket ones
DeviantSRX
New member
I just put 4" of rise on my SRX and the cables made it but the brake line was pretty tight. I went to my local Yamaha shop and they got me a "generic" braided steel brake line 6" longer than stock for about $45 Bucks
You will probably need a different brake line> The others should make it with some creative routing