8DN20s in a Viper?

xsivhp

Active member
Joined
Dec 11, 2004
Messages
1,537
Age
55
Location
Eau Claire, WI
Anybody run these - any improvement over stock?

Can anyone share their experience and setup?

I have a stock 04 viper s with a green spring and 53/43 helix. Sled has ice ripper xt track and I weigh in about 275 fully geared up.

Thanks!
 
i ran 8dn-10's in my viper. that's what came in a hauck #4 clutch kit, that i got from one of my buddies. i didn't think that the sled pulled very hard. i threw in some heavy hitters and wala. pulled much better outta the hole and midrange to the top felt close, but i think the h/h's still pulled better. i have 2 sets of 8dn-10's. you want a set to try? one set should be from a '99 srx, so its stock srx setup and the other set has a aluminum rivet on inner hole i think, and the tip has nothing, so you can put bolts and such in, which i have here.
 
I've heard of people running the -20s to get a little better pulland as a kicker they sometimes get a little better gas mileage as well.
 


Back
Top