carb help

waynemags

New member
Joined
Nov 13, 2007
Messages
50
Age
54
Location
alberta canada
hey guys. just rejetted my sled. 98 srx 700m. when i hit the throttle fast, it bogs. if i hit it fast and hold it , it wiil die. if i open it a little slower it runs fine. ive got 145,145 and 147.5 and 42.5 pilot. any ideas why it doing this? pilot screw is 1 1/4. had smaller jets before 135 across and 60 pilot. help.
 
what's the needle clip position at? should be in the middle w/both washers underneath the clip. put mains at 146.3 for pto/center and 148.8 for mag. try fuel screws @ 1-3/8 turns. when i had my '99 700 srx, it wanted fuel screws @ 1-1/2 to 1-5/8 turns out. are all carb passages nice and clean?
 


Back
Top