brake Disc

[procharged04]

Does any buddy no how much play should the brake rotor have should it move back and fourth on the shaft? Put a new track on and cant figure why i dont have any brake response. Did i put something back together wrong? I had the disc and caliper off when i put the new track on. Also the pads dont touch the disc when brake lever is pulled.

 

[Yamidude59]

it should move a little on the shaft(secondary moves in and out a little to compensate for alignment), but you probably have to adjust the brakes.

 

[procharged04]

i have almost adusted the brake all the way out

 

[braindead1684]

Did you forget to put the all the parts in behind the calipers????

 

[edunn69]

Did you put the key back on the shaft before putting the disk on? Does the disk turn on the shaft?

 

[Mysledblows]

I'm with ^^^ I think you missed the key.

 

[vmax4rules]

Did you put the key back on the shaft before putting the disk on? Does the disk turn on the shaft?

I agree or it's possible that #15 fell out.

 

[procharged04]

Does anybody have a number 15 that they would beable to part with. I took it back apart @ that is missing. I cant find it either.

 

[vmax4rules]

Does anybody have a number 15 that they would beable to part with. I took it back apart @ that is missing. I cant find it either.

Kerby I will throw one in the box with your silencer.